not printing

Post any question about Nobel Series printer here.

not printing

Postby » Mon May 03, 2021 12:19 pm

Hoep someone is reading this because i see not much activity.
Still trying to work with the 1.0A. But now After error 1005 that i solve it got error 1008, engine issue 4.
Taking the front of from the cabinet i saw that the laser unit is only move a couple of mm's. So not at the place that the object should be placed. ?????? So no movement of the y ax!
Did a firmware undate no changes.
New Arrival
Posts: 6
Joined: Fri Jun 21, 2019 2:37 am

Re: not printing

Postby » Thu May 27, 2021 12:01 pm

Wel i have solve the problem myself.
I took the step to open the cabinet and dismantle the uv unit.
It is actually an upgraded unit from a laser printer. The difference is that the light source
is a uv light beam, the rest in fact the same.
Received the cleaning manual from Ropiro in the Netherlands. Top service!
Then i had to clean one glas window 10x10mm inside the unit. After that it could print again.

New Arrival
Posts: 6
Joined: Fri Jun 21, 2019 2:37 am

Return to Nobel Series

Who is online

Users browsing this forum: No registered users and 1 guest