Print from card function

General 3D printing related questions, post here!

Print from card function

Postby DeaconBlue57 » Thu Aug 18, 2016 6:14 am

I've heard a lot about this function but I can't figure it out. How do you load STL files on the card provided. I' mean, I know how to put files in the folder on the card but when I do the only file the printer sees is the one sample file provided with the software on the card. What am I doing wrong?
DeaconBlue57
Apprentice
 
Posts: 35
Joined: Mon Aug 01, 2016 10:37 am

Re: Print from card function

Postby PaPaDogg » Thu Aug 25, 2016 12:30 pm

Hi,
So your printer is da Vinci JR series?
If yes, you need to load the 3w files inside.

If it is da Vinci 1.0 series
You cannot load the files in SD card.

thanks~~
PaPaDogg
Apprentice
 
Posts: 34
Joined: Tue Jun 28, 2016 9:07 am

Re: Print from card function

Postby 3dtech » Thu Apr 06, 2017 4:42 am

To print an issue card:

Click Boards (in header) > select your desired board.
Navigate to your Scrum backlog, Active sprints, Kanban backlog (if enabled), or Kanban board.
Right-click the issue that you want to print > Print selected card. The Print window will be displayed.
Select the card size for printing from the 'Card size' drop-down.
Click the Print button, and use the print functionality for your browser.

Tips: 3d printing technology gujarat

To print multiple issue cards, select the issues while pressing and holding down the 'Shift' or 'Ctrl' key, and then right-click > Print selected cards. The Print window displays the number of issue cards for printing.
To print all issues in your current board, click Board > Print cards.
When filters are active, only the visible issues will be printed.
When printing from a Scrum backlog, you can filter the cards for printing by selecting one of the sprints from the 'Select' drop-down.
3dtech
Apprentice
 
Posts: 25
Joined: Thu Mar 02, 2017 10:25 pm


Return to General Questions

Who is online

Users browsing this forum: No registered users and 1 guest

cron