Calibration Tips for da Vinci 1.0/1.0A//AiO

Tips & Tutorials for da Vinci series printer.

Calibration Tips for da Vinci 1.0/1.0A//AiO

Postby PaPaDogg » Thu Jul 07, 2016 11:02 am

For da Vinci 1.0/1.0A/AiO
We can use this calculator to do the calibration process

If the result shows error, error, error, we need to check 3 things
1) Clean the detecting pin, the top shape is semi-circle, so we need to erase the particle on it(if the cooper brush not work, use knife)

2)Clean the measurement point

3)Adjust the print bed level, if the detecting pin didn't get touch with the measurement point, we need to increase the whole print bed level

This is the most common 3 issues cause the ERROR, ERROR, ERROR in the calibration.
Posts: 34
Joined: Tue Jun 28, 2016 9:07 am

Return to da Vinci Series

Who is online

Users browsing this forum: No registered users and 2 guests