"Sample not stick to platform issue"(calibration)

Tips & Tutorials for da Vinci series printer.

"Sample not stick to platform issue"(calibration)

Postby PaPaDogg » Fri Jul 08, 2016 11:14 am

For Nobel 1.0,
if the finish parts cannot stick on the platform or partially stick on the platform, please check the following issues.

1) Do horizontal calibration, make sure there is no gap between platform and tank bottom


2)Make sure the glass underneath the Resin Tank is clean
Image

3)Avoid placing the object near cloudy parts of the tank
Image
Here is the compare between the cloudy resin tank and normal one
Cloudy tank
Image
Normal tank
Image


4)Print sample stl, if you can print, means calibration success; if not, do calibration again
Calibration.zip
(55.8 KiB) Downloaded 923 times


5)Always generate support properly before you print

6)If you can print calibration sample stl, but can't make your own stl stick to platform.

You need resize you stl, make it smaller. Large and solid sample will very easy to fail on a SLA printer. Put sample to the left of printer(near tilting axis) will make it easier to print
PaPaDogg
Apprentice
 
Posts: 34
Joined: Tue Jun 28, 2016 9:07 am

Re: "Sample not stick to platform issue"(calibration)

Postby hd2010 » Mon May 08, 2017 3:15 am

does not work at all. calibrating more than 15 times and no print sticks at all. what a waste of time and money. it does not print out of the boy at all. will send it back
hd2010
New Arrival
 
Posts: 1
Joined: Mon May 08, 2017 2:41 am

Re: "Sample not stick to platform issue"(calibration)

Postby Shelby Webster » Sun Jan 12, 2020 5:06 am

Printing mechanism and all mode are applied for the structured items for the field. The nomination of the suspects and rush writing are vital for the chips. The tool is done for the candidates. The mutual way is ousted for the modification of the parts. The indication is held for humans. The new mode is flicked for the attachment of the forms for all clues and vital paths for the field.
Shelby Webster
New Arrival
 
Posts: 7
Joined: Sun Nov 17, 2019 8:24 am

Re: "Sample not stick to platform issue"(calibration)

Postby mosesantony2013 » Thu Jan 23, 2020 10:49 pm

The video which is shown in best digital marketing agency in kochi this was really very good that I am able to understand about calibration much better. It is easy for me to do it very often. You can get a clear idea about it. Hope it will be useful for many other people too.
mosesantony2013
Apprentice
 
Posts: 64
Joined: Sun Dec 29, 2019 8:50 pm

Re: "Sample not stick to platform issue"(calibration)

Postby gracieanderson » Mon Aug 24, 2020 3:16 am

My assignment help is very popular and trustworthy among students. They are the Nursing assignment help provider. SignIn with MyAssignmenthelp.com students portal and get instant writing help for all assignment writing service. secure your academic grades today. Easy to use.
gracieanderson
New Arrival
 
Posts: 3
Joined: Wed Apr 15, 2020 3:31 am


Return to Nobel Series

Who is online

Users browsing this forum: No registered users and 1 guest