Is the ESD Rubber Mat Can Be Permanently Anti Static?

Any thoughts about 3D printing and XYZprinting? Post here!

Is the ESD Rubber Mat Can Be Permanently Anti Static?

Postby TimHangton » Thu Oct 07, 2021 2:55 pm

Anti-static rubber mats are mainly made through various processes such as static conductive materials, electrostatic disposable materials, and synthetic rubber.

Anti-static rubber mat Specifications:

The surface layer is about 0.3-0.5 mm thick electrostatic dissipation layer, the lower layer is about 1.5-1.7 mm thick conductive layer. The total mat thickness can be 2 mm, width 1000 mm and 800 mm, length 5 m, 10 m 20 m. And so on.

ESD mat has been used for a long time, it has good anti-acid, anti-alkali, chemical flow properties and is wear-resistant, easy to clean. If you are thinking about esd mat, then you are in the right place today. In this article, we are going to discuss esd mat in detail.
Road To Glory
Posts: 198
Joined: Fri Dec 27, 2019 2:42 pm

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 10 guests