No zero Calibration

Post any question about Nobel Series printer here.

No zero Calibration

Postby paradogsa » Wed May 12, 2021 1:03 am

Hello, we suppose to buy Nobel Superfine to use for science research. So, i have a few qustions.
1) Can this printer be calibrated manually on any Z-level for multimaterial printing application.
2) Can resin be loaded directly in vat wothout using automatic feeding?
3) Are there any limitations on the amout of resin loaded in? Maybe automatic restriction level. We will need load a less then 10 ml of resin.
New Arrival
Posts: 1
Joined: Wed May 12, 2021 12:51 am

Re: No zero Calibration

Postby ducklife » Tue Aug 17, 2021 8:40 pm

The article gives me a lot of interesting information about this game. you can visit: to enjoy many new, exciting games.
Road To Glory
Posts: 119
Joined: Wed Aug 07, 2019 2:19 am

Re: No zero Calibration

Postby nobita88 » Thu Aug 19, 2021 1:08 am

Your article content is being interested by a lot of people, I am very impressed with your post. I hope to receive more good articles. paper io 2
Posts: 277
Joined: Tue Dec 10, 2019 8:26 pm

Re: No zero Calibration

Postby followersaustralia » Wed Oct 13, 2021 4:24 am

Fortunately, all these factors, which can affect the Offset, usually do not change the Full Scale. Span or Sensitivity of the output. In other words, the Ideal ...
buy instagram followers cheap
Posts: 11
Joined: Mon Dec 09, 2019 10:35 pm

Re: No zero Calibration

Postby BugMeNot » Thu Mar 31, 2022 9:52 am

Without high-quality printing of the first layer, we are unlikely to be able to get a beautiful model, which is why good adhesion of the desktop is necessary. But if the gap between the nozzle and the platform is too large, then the plastic will have problems sticking and peeling off from it, following the nozzle. Even if the first layer is more or less fixed, you will still encounter a problem later since an almost printed model can completely break away from the desktop (which is even more unpleasant). Most importantly, look at the data. There will be no number labels as you are used to seeing on the scales therefore, it is worth getting used to the 3d printer school.
Road To Glory
Posts: 135
Joined: Thu Mar 26, 2020 9:31 am

Return to Nobel Series

Who is online

Users browsing this forum: No registered users and 3 guests