Filament jam always and never working cooler

Post any question related to da Vinci series printers here.

Filament jam always and never working cooler

Postby Misha » Mon May 04, 2020 12:00 am

Hello,

Anyone please help! I’m new in 3d printing and here’s the problem. By the way I have a WiFi Pro. Well I always have problems with filament jam. I tried to clean the extruder a million times and it looks like it’s working but at about 50-70 per cent it jams and I don’t know what to do. Also recently added a problem of a lot of filament getting stuck, like everything that can fit in the extruder is getting stuck and you can’t move it at all, I had to heaten up the cleaner and hope that it works and when we really got it all out it happened again. I am suspicious about the local cooler, on the extruder, it seems to have never worked, I opened up the extruder and all the wires are okay but I might haven’t seen something. Help me please with the printer I’m so tired with it and would like it to work again.
Misha
New Arrival
 
Posts: 1
Joined: Sun May 03, 2020 12:28 am

Re: Filament jam always and never working cooler

Postby ducklife » Thu May 07, 2020 1:37 am

The content is quite elaborate and detailed, but I think it needs more practical elements to attract the attention of readers, thank you for sharing this article.
vin lookup
ducklife
Apprentice
 
Posts: 30
Joined: Wed Aug 07, 2019 2:19 am

Re: Filament jam always and never working cooler

Postby Herjun » Sat May 23, 2020 11:22 am

Hi

I have same problem with minimaker. Hope will get the responses here.

Thanks.
Cheers
Greg
Herjun
New Arrival
 
Posts: 1
Joined: Sat May 23, 2020 11:20 am


Return to da Vinci Series

Who is online

Users browsing this forum: No registered users and 12 guests